دانلود مقاله A COMPARATIVE STUDY TO EVALUATE THE EFFICIENCY OF RCS AND CGP PROCESSES تحت word دارای 12 صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است
فایل ورد دانلود مقاله A COMPARATIVE STUDY TO EVALUATE THE EFFICIENCY OF RCS AND CGP PROCESSES تحت word کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه و مراکز دولتی می باشد.
این پروژه توسط مرکز مرکز پروژه های دانشجویی آماده و تنظیم شده است
توجه : در صورت مشاهده بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل ورد می باشد و در فایل اصلی دانلود مقاله A COMPARATIVE STUDY TO EVALUATE THE EFFICIENCY OF RCS AND CGP PROCESSES تحت word ،به هیچ وجه بهم ریختگی وجود ندارد
بخشی از متن دانلود مقاله A COMPARATIVE STUDY TO EVALUATE THE EFFICIENCY OF RCS AND CGP PROCESSES تحت word :
سال انتشار: 1392
محل انتشار: کنفرانس ملی مهندسی مکانیک ایران
تعداد صفحات: 12
چکیده:
In this research, modern manufacturing processes of constrained groove pressing (CGP) and Repetitive corrugation and straightening (RSC) as two effective severe plastic deformation (SPD) methods was applied on the specimens of low carbon steel sheets, in order to improve mechanical properties such as tensile strength and micro hardness. According to few differences between CGP and RCS a comparative study was carried out in order to investigate inhomogeneity factor, force diagram, and amount of induced strain via these two strengthening processes. The finite element simulations were carried out under 2D condition, using Abaqus software for both RCS and CGP processes. The CGP finite element simulation was first validated by the experimental results. It is concluded from this study that although less force is needed for RCS process, but CGP process is considered as a more effective SPD process due to less material wastage. In addition, the shear strains are induced on the sheet more uniformly in CGP process comparing to RCS process and thus it leads a better and more uniform mechanical properties.
- ۹۵/۱۲/۲۰